IP Audio Systems 
2N® SIP Audio Converter
interest btn ensip audio converter


Connect your Public Address to your telephone system and use it to make announcements via your mobile phone. 2N® SIP Audio Converter converts the sound from a SIP phone system to the classic analogue form so you can broadcast live or pre-recorded messages over the IP network to any distance.

Suitable for:

  • Offices and warehouses
  • Health care
  • Schools
  • Shops
  • Sports facilities
  • Parking and Secure zones
  • Government buildings 
  • Other public spaces

Features & Benefits:

• Two-way Communicator

Use the Converter with an external speaker as a simple Public Address system or with a microphone as a two way communicator on the principle of a simple IP intercom.

• Multicast broadcasting

Broadcast to an unlimited number of end devices, all without burdening your LAN/WAN with redundant data-streams.

• Using the IP audio features

Set up different zones, schedule the broadcasting of pre-recorded tracks or regulate the volume. The Converter can easily be connected to 2N® IP Audio Manager software to take advantage of its countless possibilities

• Built-in relay

External devices can be controlled using the relay or you can use it as a priority switch (override mode).

• Powerful amplifier

2N® SIP Audio Converter has a built-in amplifier with an output of 2x10W so it can easily be connected to a speaker without the need of an external amplifier.

• Calling

By connecting a microphone and a switch button you can call up to three pre-set numbers.

• Remote control

Easily adjust volume using the remote control or web interface. This is especially handy when installing in high-up or relatively inaccessible places.

• Easy installation

Simply plug the Converter into an existing LAN/WAN network. No tricky programming or cable installation.

• Simple configuration

The device is configured via a custom Web interface or the SW application, which saves time, especially in the case of large-scale installations.

• Informacast protocol support

The Informacast protocol allows for spoken or sound recording play back from Cisco devices.

• Integration to other systems

The speaker is easily integrated into third-party systems.

IP Audio Systems 
2N® SIP Audio Converter
 
Dimensions and weight - standalone unit 2N® SIP Speaker
  • Dimensions
    105 x 34 x 86 mm
  • Dimensions (with L-profiles)
    130 x 34 x 86 mm
  • Weight
    300 g
Amplifier parameters
  • Output of power amplifier
    4 terminals on rear panel, STEREO/MONO with auto detection
  • Speaker impedance
    4-8Ω
  • Amplifier performance
    Up to 2x10W depending on connection
  • Frequency range
    20Hz – 20kHz (+/- 0.5dB)
  • Harmonic distortion
    0.05% @ 1kHz
  • Signal to noise ratio
    91dB
Power
  • External power supply
    12V DC / 1.8A
  • LAN power supply
    PoE IEEE 802.3af
Interface
  • Status signal
    3x RG LED on front panel
  • Local control
    3x Button on front panel
  • Remote control
    1x Infrared detector on front panel
  • LAN connection
    RJ-45 connector on rear panel 10/100BASE-TX with Auto-MDIX function
  • Earphone/line out
    1x STEREO 3.5mm jack on front panel
  • Microphone/line out
    1x STEREO 3.5mm jack on front panel
IP Audio Systems 
2N® SIP Audio Converter
 
 914401E FINAL
914401E - 2N SIP Audio Converter 
 914490E FINALpsd
914490E - 2N SIP Audio Converter Set with Speaker Mic
IP Audio Systems 
2N® SIP Audio Converter
 SIP AUDIO InformaCast License
914407E - 2N SIP Audio Converter - InformaCast Licence
 G729 License
9137902 - Licence for G.729
IP Audio Systems
2N® SIP Audio Converter




 

 

 

 

 

 

©2012 PNT™ - All Rights Reserved